Website design for manufacturers: build it around how buyers arrive

Build a manufacturing website around how buyers arrive: a way in for each industry, certifications in the main navigation and capability as the offer.

TL;DR

A manufacturing website works when it's organised around how buyers arrive, not around the equipment you own. The engineer, the procurement lead and the program manager who land on your site aren't there to admire the machines. Each one is asking a version of the same question: can you make this, under these requirements, without becoming a problem for me? They're trying to rule you in or out, and they do it fast.

So give each industry its own way in. Put certifications in the main navigation, where a regulated buyer looks first. Make capability the offer and keep the equipment list as evidence underneath it. Then make the RFQ form ask what your estimators would ask.

How the site looks matters less than whether a stranger can check you in a minute.

Related: Thinking about a website redesign? · How to choose a manufacturing marketing agency · How much does a website redesign cost?

The short answer

Organise the site around how buyers arrive, not around the equipment you own. An engineer, a procurement lead and a program manager each come asking whether you can make their part, under their requirements, without creating a problem for them. Give each industry a way in, put certifications where a regulated buyer looks first and make capability the offer.

What I think

Buyers don't come to see your machines. They come to rule you in or out.

A regulated buyer starts with a long list of possible suppliers and spends most of the effort cutting it. More and more of that cutting happens on your website, before anyone picks up the phone. You never see it happen. You just get fewer RFQs, or RFQs for the jobs nobody else wanted. I've written about that side of B2B buying here.

Of course the site was built around the equipment. For years the people who sent you work already knew what you could do, and the site was there to confirm it. A list of machines and a photo of the floor was a fair answer to the question they were asking, which was whether you were still the shop they knew.

A stranger is asking something else. They don't know you, and they aren't trying to like you. They're looking for a reason they can't use you, because every new supplier is a risk they'll have to defend later. A good manufacturing site makes that check quick, and makes it pass.

So I'd design the site backwards from the cut. What does each buyer need to confirm before you stay on the list? Put that first and put everything else behind it.

Answer the cut first. Show the machines after.

The equipment list problem

Most manufacturers organise a site around the equipment they own. It's the natural way to do it. The equipment is the investment, it's what the owner is proud of and it's the easiest thing in the building to photograph.

The trouble is that a machine list answers a question the buyer hasn't asked yet. A procurement lead at a medical device company doesn't start with your spindle count. They start with whether you hold ISO 13485, whether you've built for products like theirs and whether you can take a job from prototype to production. If the homepage opens on a gallery of equipment, they have to dig for all three. Some will. Plenty will go back to the search results and click the next supplier.

There's a fair exception. For some job shops the equipment really is an early question. A buyer who needs a part of a certain size or tolerance does check machine capacity before much else. If that's your buyer, keep the list and make it easy to scan. Put it on the capability page, as proof under the offer, rather than making it the offer.

The machines are the evidence. The capability is the answer.

Built around how they arrive

The clearest example I have is EST, a precision electronics manufacturer with thirty-five years of reputation behind it. Full disclosure: the founder is my dad, and EST was my first client. For most of those years the people who knew EST sent the work. When they started retiring, a new generation of buyers had never heard of the company, and plenty of them found a competitor with a cleaner site and sent the RFQ there.

The case page puts it this way: EST's buyers don't arrive thinking "show me your machinery." They arrive thinking "can you build this, at this stage, under these requirements, without creating a very expensive problem for me?"

So the site is organised around how they enter. There are four solution paths and four industry paths: medical devices, defense and aerospace, industrial electronics and emerging tech. Each page is a door for a specific buyer, and a place a search can land.

The front door says what the company is, plainly and above the fold: Quality-Driven Electronics Manufacturing. Capability is the offer, laid out as quality assurance, supply chain, program management and systems integration.

And the certifications moved into the main navigation. ISO 9001, ISO 13485 and ITAR sit where a regulated buyer looks first, instead of in a footer. As I put it on the case page, "For a regulated buyer those aren't footnotes. They're the first cut."

None of this was about looking newer. The case page describes the shift as going from a factory people knew to a company strangers could understand. The full case, with the live pages, is here.

The people who knew EST never needed the site. The strangers needed it to do all of that explaining.

What a manufacturing site needs, page by page

Each page should answer one buyer's question, in roughly the order they ask it.

The front door. One line above the fold that says what you make and for whom, in words a buyer would use. A plain description they could repeat to a colleague beats a slogan every time.

Industry paths. A page for each industry you serve, written for the buyer in it. What you've built for that industry, the requirements you work under there and the certifications that matter to them. If you sell into defense and medical devices, those pages should read differently, because the buyers check different things first.

Capability. What you take on, written as the offer: the stages you cover from prototype to production, the processes you run and the work around the build, like supply chain or program management. This is where the equipment list belongs.

Certifications. One page, linked from the main navigation. Each certification, what it covers and a copy a buyer can download without emailing you. For a regulated buyer this is often the first page they open.

Quality and process. How a job moves through the building, how you inspect it and what happens when something goes wrong. Quality engineers read this page closely, and a vague one makes them nervous.

Proof. Work you've done, described by the problem it solved and the requirement it met. If customers won't let you name them, describe the kind of program instead. A buyer can check something like "box builds for a defense prime, under ITAR" against their own need. They can't check "trusted by industry leaders."

An RFQ path that asks the right questions. A form with a single message box gets you emails you have to chase. Ask what your estimators ask: the drawing or file, quantities, the stage (prototype, pilot or production), materials, required certifications and the timeline. Let them attach files. Then tell them what happens next and when they'll hear back.

Every page answers one of the buyer's questions. The RFQ form asks yours.

What "best manufacturing websites" lists get wrong

They judge the look. Lists of the best manufacturing websites rank sites on photography, motion and how modern the design feels. That's useful if you want ideas for a homepage. It tells you very little about whether the site works, because the people writing the list aren't the buyers.

The look does matter some. A site that feels badly out of date makes a stranger wonder what else hasn't been kept up, and a competitor with a cleaner site can win the click on that alone. It just isn't the part that gets you shortlisted.

If you're browsing manufacturing website examples, look at them the way a buyer would. Pick one industry you sell into. Open the site and see how long it takes to find the certification that industry needs, the kind of work they've done for it and the way to send an RFQ. Then run the same test on your own site.

A good-looking site gets a second look. A checkable one gets the RFQ.

Redesign or rebuild?

If the content is right and the site just looks dated, a redesign will do. If the site is organised around the wrong question, you're rebuilding the structure, and the design comes after.

A quick way to tell: read your main navigation out loud. If it's a list of machines and processes, the structure is following the equipment, and a new look on top won't change what a buyer finds first. I've written about how to decide whether you need a redesign at all.

Whatever you do, don't throw away the search traffic you already have. A rebuild that changes every URL can lose rankings your old pages took years to earn. Here's how to redesign without losing your search rankings.

Fix the order first. Then fix the look.

What it costs

I've broken down what a website redesign costs, and if you're also weighing outside help for the thinking, I've put consultant, agency, fractional CMO and in-house costs side by side.

Where to hire for the build

Whoever builds it, a good web designer or developer will ask who your buyers are and what they need to see before showing you a homepage. If the first meeting opens on design concepts, hand them the page-by-page list and see what they do with it.

If you're choosing outside help for the wider marketing, here's how I'd choose a manufacturing marketing agency. If you want to talk about the site itself, here's how I work on websites, bringing in the specialists a build needs.

Not sure which problem you're looking at? The Quick Read is free and takes three minutes. It tells you whether it's the look, the message or something else. Take the Quick Read

Read next: Thirty-five years of reputation. Nobody new could find it. · How to redesign without losing your search rankings · How much does a website redesign cost?


Not sure which problem you’re looking at?

The Quick Read is free and takes three minutes. It tells you whether it’s the look, the message or something else.

Take the Quick Read

Already know? The Outside Read is one week and $1K.